|
hf3000
|
Discerning woodworkers will always choose the hf 3000 moulding machine.
The right rotation speed together with a perfectly set up tool gives
the optimum end result first time - every time. With the scheppach hf
3000 you have the choice of three spindle speeds and can read the
chosen speed is confirmed on electronic digital speed display. No
chance of getting it wrong with scheppach.
Precision set up is simplicity.
You can set the standard adjustable fences on either side of the
tooling with an accuracy of 1/10th of a millimetre and adjust the
tooling height by means of a handwheel and according to the accurate
measuring scale. If necessary you can fit the optional sliding table
carriage with clamping device for all cross grain operations. Then by
means of the standard clockwise and anticlockwise operating modes it
is possible to conduct the maximum variety of moulding operations.
Together with braked motor you are assured of the maximum operating safety. |
|
hf 3000 |
|
Standard equipment
Level table plate of nickel plated steel, height
adjustable moulding moulding spindle with clockwise and
anti-clockwise rotation, moulding fence with individually adjustable
fence rails, roller guard, exchangeable table insert ring, electrical
rpm indicator, suction connector. |
|
|
|
|
|
Technical data |
|
|
L/B/H mm |
660/610/1050 |
|
Table size mm |
615 x 450 |
|
Table height mm |
880 |
|
Table opening Ø mm |
112/135 |
|
Spindle Ø mm |
30 |
|
Spindle height adj. mm |
100 |
|
Spindle swivel range ° |
|
|
Spindle Speed rpm |
3000/6000/9000 |
|
Tool hole Ø mm |
30 |
|
Max. tool Ø mm |
200 |
|
Tool clamping height |
100 |
|
Suction connector Ø |
100 |
|
Weight approx. kg |
88 |
|
|
|
Motor |
230 V/50 hZ |
|
Input kW (HP) |
2.8 (3.8) |
|
Output kW (HP) |
1.8 (2.5) |
|
rpm |
2800 |
|
Brake |
yes |
|
Motor protection |
yes |
|
Switch/plug comb. |
|
|
with no-volt release |
yes |
|
|