|
NOT AVAILABLE |
|
FEATURES |
|
Non Flex Fence
The surface planing fence is manufactured from a
hardened steel pressing, that is roboticaly welded to its support
areas. Two securing handles eliminate any risk of the fence moving
during use, even when extreme pressure is applied. |
|
Motor Torque
The distance of the motor and the cutter block drive
mechanism has been significantly reduced in order to maximise the
torque capacity when under load, therefor eliminating stalling when
working on hardwoods of maximum dimensions. |
|
Infeed and Outfeed Rollers
Both the infeed and outfeed rollers that pull the
timber through the thicknesser are spring loaded, ensuring no
markings are made to the finish of the timber. |
|
Chip Ejection
Both the surface and chip ejection shoots are
positioned to avoid clogging which can result in shaving being pushed
back into the clutter block area, and creating a stepping finish of
the timber. |
 |
|
|
Specifications |
RD30 |
|
Planer: |
|
|
Sound level in dB(A) |
85 |
|
Speed of rotation |
6000rpm |
|
Max. cutting width |
300mm |
|
Max. depth of cut per pass |
3mm |
|
Total length of table |
1200mm |
|
Length of infeed table |
600mm |
|
Adjustable sectional fence |
800x150mm |
|
Cutterblock dia. x No. of cutters |
60mm x 2 |
|
|
|
|
Thicknesser: |
|
|
Sound level in dB(A) |
80 |
|
Speed of rotation |
6000rpm |
|
Max. cutting width |
300mm |
|
Table dimensions |
540 x 300mm |
|
Thicknessing height |
165mm |
|
Max. depth of cut per pass |
3mm |
|
Wood feed rate |
5 m/min |
|
|
|
|
Other Data |
|
|
Dia. of dust extraction outlets |
100mm |
|
Net weight |
90kg |
|
Overall dimensions |
1200x550x1020mm |
|
Thicknessing Table
Unlike many competitors models which have one central
column supporting the thicknessing table, the RD26 and RD30 are
supported and height controlled by four threaded steel rods. The
steel rods are positioned at each corner of the table and are driven
by a hardened steel linked chain, which eliminates dipping when
working on solid, heavy hardwoods.
Friction Reduction Table
Both the surface and the thicknessing table are coated
with a Teflon based compound to avoid timber snagging and stalling,
enabling hard and softwoods that contains moisture and sap to freely
pass with a minimum of resistance. |
