10in & 12in TILTING_ARBOR SAWBENCHES

TA/SP. 175 10in Model cuts to 3 1/8in deep at 90º
TA/SP. 275 12in Model cuts to 4 1/8in deep at 90º

 

Large accurately machined cast iron table. Saw Arbor assembly attached to robust apron casting making all alignments independent of base. Blade tilts 45º, positive non-jamming stop at 90º. Large engraved scale for accurate setting. One hand knob locks rise and fall and angular setting. "Stick-mike" table extentions (Standard equipment) increase work space to 72in x 28in. Maximum setting of rip fence to right of saw permits cutting to centre of 100 in panel. Rip fence locks front and rear of table with one lever movement.

Stopping time less than 10 seconds. 

 

 

PRICES REBUILT - 3 PHASE:
10" £900+VAT
12" £950+VAT

 

SPECIFICATION

TA/SP. 175

TA/SP.275

Saw Blade Diam.Bore:

10in / 5/8in

12in / 5/8in

Max. Cut at 90º/45º:

3 1/8in / 2 1/8in

4 1/8in / 2 7/8in

Max. Rip right and left of Saw using extentions:

50in / 42in

50in / 42in

Distance Front of Table Centre of Saw

16in

16in

Scale graduated in 1/16in

24in

24in

Blade Speed ft/min.

10,000

10,000

Motor 3,000 r.p.m Single-Phase

1.5 h.p.

2 h.p.

Motor 3,000 r.p.m Three-Phase

2 h.p.

3 h.p.

D.B. Keighley Machinery Ltd, Vickers place, Stanningley, Leeds, LS28 6LZ.
TEL: 0113 257 4736 - FAX: 0113 257 4293