TYPE BGY3

THE MAIN FRAME is one piece casting mounted on a steel sub-base.

THE SANDING DISC is turned steel and runs on "sealed-for-life" ball bearings. It is easily removed for replacement of the abrasive which is cemented on to ensure a dead flat face.

THE TABLE cants 10º above and 45º below horizontal with angle clearly shown on scale. It is grooved to recieve a swiveling fence.

THE BELT SANDER can be pivoted and locked in any position between horizontal and vertical. The smaller pulley yoke is spring-loaded for belt tensioning. Knurled handscrew ensures correct tracking of belt.

BELT SANDING TABLE acts as a stop when belt is horizontal and as a work table when belt is vertical. It is adjustable to any angle up to 45º from the sanding belt.

THE DRIVE. A motor in the base drives the main spindle through a pair of linked vee belts.

SPECIFICATION

Dia. of sanding disc:

16"

405mm

Size of sanding belt:

63" x 6"

1,600 x 150mm

Size of disc table:

25" x 9"

635 x 230mm

Speed of sanding spindle (r.p.m.):

1,500

1,500

Size of belt sanding bed:

18 1/2" x 7"

470 x 175mm

Size of canting table:

7 1/2" x 6"

190 x 150mm

Dia. of belt pulleys:

6" and 4"

150/100mm

Speed of sanding belt:

2,350ft. min.

716m. min.

Maximum floor space:

36" x 27"

915 x 685mm

Net weight:

647lb

300kg